Noisy garage door and tune-ups in White Plains

Noise is the earliest warning a garage door gives. It is usually a simple fix if it is dealt with in time.

Call (914) 758-1299

In short

A garage door in White Plains that squeaks, grinds or shakes usually needs lubrication, new rollers or a spring adjustment. A tune-up covers balance, hardware, cables, rollers and the opener's safety reverse, with the price given first.

Two torsion springs on the shaft above a double garage door

Wear and weather in White Plains

In Gedney Farms, Rosedale and the Highlands, White Plains houses from the 1920s to the 1950s have garages with low ceilings and doors hung on low-headroom hardware, which has more moving parts and needs more frequent adjustment than a standard setup. Around Ridgeway and Prospect Park, mid-century steel doors are on worn rollers. On Fisher Hill and Battle Hill, garages under the house on a slope are damp and take meltwater at the threshold. City streets, I-287 and the parkways put salt on every tire for months. Commuter households open the door early in the cold. A tune-up each fall, with a look at springs, cables and the bottom brackets, is what these doors need.

How a door tells you it needs service

  • It got noisy. Dry or worn moving parts. The most common reason people call.
  • It moves unevenly. One side leads, or the door shakes on the way down.
  • It feels heavy by hand. With the opener disconnected and the door closed, it should lift with one hand and stay put halfway. If it doesn't, the springs need adjusting or replacing.
  • Daylight shows at the bottom or sides. The seals are worn or the door is out of level.

Simple upkeep between visits

Three things are safe for any homeowner: lubricating the hinges and rollers with a product made for garage doors, wiping the tracks and the sensor lenses clean, and testing that the door reverses when it meets an obstacle or when the sensor beam is broken.

Three things are not: adjusting springs, loosening the bottom brackets where the cables attach, and removing a section's hinges while the door is under tension. Those are where injuries happen.

What the technician does on a service visit

A proper service starts with the opener disconnected, so the door itself can be judged: balance, spring condition, cables, rollers and tracks. Hardware is tightened and moving parts are lubricated. Then the opener is reconnected and its limits, force and safety sensors are tested. If rollers, a hinge or a seal are worn, you are shown the part and given the price before it is changed.

Around White Plains

  • The Highlands: Hillside streets near the high school with built-in garages.
  • Ridgeway and Prospect Park: Established streets between downtown and the Scarsdale line.

See the full White Plains service area.

Leave the door where it is and call.

Springs and cables hold a lot of tension. Don't lift the door by hand or keep pressing the opener; call and we'll book a technician.

Call (914) 758-1299
Call (914) 758-1299