In short
Off-track doors usually follow a snapped cable, a bumped rail or worn rollers. A technician in White Plains fixes the cause, not just the symptom, then balances the door and tests it before handing it back.

Track problems in White Plains
Narrow doors at the bottom of a sloped drive get bumped. One hard tap from a bumper pushes the lower panel in and kinks the vertical rail, and the door then drags or sticks halfway.
Water pooling at the threshold also rusts the bottom fixtures that anchor the cables. A technician replaces those parts as a set and straightens or swaps the damaged rail.
Why doors come off track
- A car or mower bumped the door or the track.
- A lift cable snapped or slipped off its drum, so one side dropped.
- Rollers wore out and jumped the track.
- Track brackets loosened and the tracks spread apart.
- The opener kept pulling after something blocked the door.
Keep it safe
Disconnect the opener, keep everyone out of the doorway, and leave the door where it is. Forcing it can bend panels and turn a track repair into a door replacement.
On the repair visit
First the door is made safe so it can't fall. Then the technician frees it, sets the rollers back in the rails and checks why it came out: a frayed cable, a cracked hinge, a bent section of track or a loose bracket. Those parts are fixed or replaced, the spring tension is evened out, and the door is cycled a few times with the opener's auto-reverse tested at the end.
Around White Plains
- North Broadway: Colonials and Victorians north of downtown.
- Fisher Hill and Battle Hill: Older, compact lots west of the center.
See the full White Plains service area.
Questions we hear in White Plains
The opening is only seven feet wide. Are doors made that small?
Yes. Doors are built to order for narrow pre-war openings.